Induction Lamp Vs Metal Halide Lamp

  • Induction Lighting has a bulb life rating of up to 100,000 hours. It is not sensitive to operating position
    Metal Halide typically most bulbs are rated at 10,000 hours (in the vertical position). Most bulbs are in the horizontal position and must be reduced in rating by approx. 20% (8000 hrs).
  • Induction Lighting has slow lumen depreciation (light loss) and can maintain up to 70% of original lumens for 60,000 hours or more.
    Metal Halide has fast lumen depreciation (light loss) and can lose 5% of its lumens in the first 200 hours, and 20% lumen loss every 2000 hours (5-6 months) thereafter. Burning 400w of power but getting 200-225 watts of light at the end of year one. Comparatively poor effciency.
  • Induction Lighting is nearly maintenance free for the rated life of the bulb/ballast and has a 5 year warranty.
    Metal Halide is high maintenance and has no known warranty.
  • Induction Lighting has an operating temperature of 48C to 74C degrees.
    Metal Halide has a high operating temperature of 232C to as much as 482C degrees. This is a very costly (energy) A/C issue for indoor applications.
  • Induction Lighting has high visual acuity (visible) lumens per watt of 191.
    Metal Halide has a visual acuity lumen rating of 80 per watt.
  • Due to the high visual acuity lumens per watt, with Induction Lighting, you can use a 150 watt induction bulb to replace a 400 watt metal halide. Highly energy efficient.
    Metal Halide suffers with lower visual acuity lumens per watt, high wattage needs for adequate lighting, high maintenance, high and quick lumen loss and sensitivity to operating position.
  • Induction Lighting has a high CRI (colour rendering index) of 90+. Improving vision recognition. Metal Halide has a CRI of 65.
  • Induction Lighting has a consistent crisp blue-white light throughout its lifespan.
    Metal Halide experiences colour shifting as it quickly ages. It can be seen turning pink and grey.
  • Induction Lighting is instant-on and instant re-strike. Eliminating warm up periods.
    Metal Halide has a 10 minute warm up period.
  • Induction Lighting is better for the environment using a solid amalgam (dental mercury form) of only 1.5-6.5 mg. which can be easily handled and recycled as well as all other parts of the light. Metal Halide uses 30-50 mg of mercury and requires special handling. Also, using metal halide means 8-10 times more hazardous waste to deal with because of more bulbs to replace versus induction. And it is not in a solid amalgam form.

P.O. Box: 114815, Abu Dhabi, UAE,

          +971 2 632 3626    +971 2 632 3636

P.O. Box: 46818, Sharjah, UAE,

                  +971 6 555 1141     +971 6 555 1181


© 2005 Powered by Dimensions